Sparki does not perform coding

The Easy Robot for Everyone!

Sparki does not perform coding

Postby awesomecupcake » Sun Jan 08, 2017 2:49 am

After numerous attempts to upload coding for the robot to follow a line, it does not perform. Instead it sits idle.
When lifted off the surface the wheels turn, when placed onto track it will either move in a straight line until it reaches the edge of table or it will indefinitely rotate 360 degrees.
awesomecupcake
 
Posts: 1
Joined: Sun Jan 08, 2017 2:41 am

Re: Sparki does not perform coding

Postby roboalchemist » Sun Jan 08, 2017 6:26 am

The surface should be white, and the line black for greatest effect. Are you using the included line following maze?

You may also have to adjust the threshold value for the line following program:
http://arcbotics.com/lessons/line-following/
---
Joseph Schlesinger - ArcBotics Co-Founder/CTO
roboalchemist
Site Admin
 
Posts: 669
Joined: Mon Jul 16, 2012 3:02 am


Return to Sparki

Who is online

Users browsing this forum: Eng.teto and 4 guests